 |
|
|
|
|
||
|
|
|
|
|
|
||
|
♥Table of Contents Brazilian Embroidery Patterns and Kits ♥ JDR Brazilian Embroidery Designs ♥Hearts and Flowers Designs ♥Quilt Sampler Designs ♥Brazilian Embroidery Learning Kits ♥Starter Package ♥Sunshine's Treasures ♥Brazilian Embroidery Guest Designers ♥Christmas Designs ♥Quilt Blocks  ♥Threads and Ribbons ♥EdMar Threads ♥Thread Packets ♥Kreinik ♥Japan Threads ♥YLI Candlelight ♥YLI Silk Ribbon
Sales Pages |
PN6626 $6.00 After your punchneedle work is complete, use this glue to attach a second piece of fabric to the back of your work. Simply spread a thin, even coat of glue over the surface of the fabric. Place the backing fabric on the back of your work. Before the glue dries, lay the silicon sheet (included) over the work and iron with a dry iron. Silicon sheet prevents the glue from adhering to your iron. Glue dries transparent. Effectively prevents punchneedle work from unraveling. Clover PN6626 $6.50
 Clover Embroidery Stitching Tool (punchneedle) - handle & needle This Clover embroidery stitching tool (punchneedle) can be used to create loops, satin stitches, or backstitches. Complete instructions are included. Set includes a comfortable handle, needle threader and the three-ply needle with protective cover. Simply unscrew the handle grip, insert the needle to the length loop you need, and tighten the handle. Use the stopper on the handle as a direction guide to remind you which direction to punch. Also available separately (see related products below) are two extra threaders, a single-ply needle with cover, and a medium-fine yarn needle with cover. PN7311 $11.00
Clover Embroidery Stitching Tool Needle Refill - Single Ply
Clover Embroidery Stitching Tool Needle Refill - Medium-Fine Yarn PN7313 $7.00
PN7314 $5.00
Clover 7" Locking
Embroidery Hoop 7" (18 cm)
locking embroidery hoop is perfect for punchneedle embroidery or any
hand embroidery. Special lip on the inner hoop grips the fabric firmly when the
outer hoop is tightened, keeping the fabric taut. Special cover over the
tightening screw on the outer hoop keeps your thread from tangling in the screw.
 Clover 4.75"
Locking Embroidery Clover No-slip Hoop 4.75" (12 cm) locking embroidery hoop is perfect for punchneedle embroidery or any hand embroidery. Special lip on the inner hoop
grips the fabric firmly when the outer hoop is tightened, keeping the fabric
taut. Special cover over the tightening screw on the outer hoop keeps your
thread from tangling in the screw. Can be used with the Clover Embroidery Hoop
Stand (N6970B).
N6970B $9.00 |
 View CartSunshine's Newest Book
Information♥Thread Inventory Sheets♥ Thread Order Blank ♥ Needle Size Charts ♥ Thread VS Needle Size ♥What do I need to begin? ♥Opening A Skein ♥Straightening Your Threads ♥Storing Your Threads ♥Technique "Levels ♥Knotting The Thread ♥Correct use of Hoop ♥ Gift Certificates ♥ Contact Us ♥ Printable Catalog and Price sheets ♥ Teachers Information ♥ Wholesale Information ♥Resources/links Where is JDR Brazilian Elegance? A Little about Sunshine  Visit our totally Dimensional Embroidery site. 
|
 
JDR Brazilian Elegance Specializing in Brazilian Dimensional Embroidery but providing stitchers with much more!
|
||
Contact Us
Ordering Information
Shipping
Fees
Terms & Payments
Back Orders/Special Orders
Returns |
||
Clover Embroidery Stitching
Tool Needle Threaders (2)
Clover No-slip Hoop Stand (fits both 4.75" & 7" Clover hoops)
This clever Clover embroidery hoop stand can be used with either the 7" Clover
locking embroidery hoop (N6970) or the 4.75" Clover hoop (N6970A). Just flip it
over to change the hoop size! This hands-free stand helps you do punchneedle
embroidery with the Clover Embroidery Stitching Tool (N7311) or any other
punchneedles. Just hold the hoop in the stand lightly with one hand while
punching with the other. Your punchneedle will not bump into the table beneath
the stand, and your hands won't tire from gripping the hoop.
